Extreme curve cutting speed

Affordably priced but technologically advanced.
Achieve the highest return on your investment.

Main Features

  • A best-in-class cutting pressure of 500g for a wider range of materials
  • Up to 2 times the curve cutting speed increases productivity
  • Event Notification function for remote monitoring
    – Plot start/end, error/warning message
  • Continuous Crop Mark Detection for precise stickers and seals.
    New Segment Compensation, which detects intermediate crop marks, enables accurate contour cutting of long-length prints
  • Upgrade of firmware can be done quickly and easily by user.
  • Ethernet connection for LAN use as well as USB2.0 and RS-232C



Effective cutting area 606mm (23.8″)

*Sheet basket and stand are optional.




Effective cutting area 1,070mm (42.1″)

*Sheet basket is optional.



Effective cutting area 1,370mm (53.9″)

*Sheet basket is optional.



Acceptable sheet width 90~740 mm 90~1,250 mm 90~1,550 mm
Effective cutting area 606 mm 1,070mm 1,370mm
Maximum speed Cutting: 70 cm/s, Moving: 100 cm/s
Adjustable speed range 1 – 10 cm/s (1 cm/s step adjustment), 1 – 70 cm/s( 5 cm/s step adjustment)
Mechanical resolution X direction: 2.5 μm、Y direction: 5 μm
Command resolution 25 μm or 10μm( MGL-IIc) / 100 μm, 50 μm( MGL-Ic1)
Repeatability *1 ± 0.2 mm / 2 M
Effective Repeatability *2 586 mm × 2 M 1,050 mm × 2M 1,350 mm × 2M
Maximum pressure 500g
of down pressure
Cutter 10 – 20 g(2 g step), 20 – 100 g(5 g step), 100 – 500g(10g step)
Pen 10 – 20 g(2 g step), 20 – 100 g(5 g step), 100 – 150g(10 g step)
Acceptable sheet *2 Vinyl sheet, Fluorescent type vinyl sheet, Reflective sheet, Rubber sheet
Acceptable tool *3 Cutter, Ball-point pen
Type of command MGL-IIC / MGL-Ic1
Interface USB2.0、RS-232C、Ethernet
Receiver buffer size 27 MB Standard (When sorting, 17 MB)
Operational environment 5 – 35 ℃, 35 – 75 %(Rh), Non-condensation
Power requirement AC 100 V – 240 V, 145 VA or less
Dimensions(W×D×H) 1,030 × 430 × 335 mm
(1,030 × 430 × 1,185 mm)*4
1,530 × 580 × 1,150 mm 1,830 × 580 × 1,150 mm
Weight 24kg 41kg 46kg
Stand Optional equipment Standard equipment Standard equipment

*1: Except for media expansion and contraction due to temperature.
*2: Operated with Mimaki specified media, cutter and cutting conditions.
Thickness of rubber and its cutting speed are limited. Guaranteed accuracy environment: Temperature 12-25℃, Humidity 45-65%
*3: Our dedicated cutter blade and specified commercial ball-point pens are available. (Drawing quality of ball-point pen is not warranted)
*4: When equipped with the optional stand (OPT-0231)

CG-SRIII Series Catalog (1.65MB) DB40268-03_CG-SRIII_ENG

2 Responses to CG-SRIII Series
  1. Wow, amazing blog format! How long have you ever been running a blog for?
    you made blogging glance easy. The entire glance of your site is wonderful, as neatly as the
    content! You can see similar here sklep internetowy

  2. Wow, incredible blog layout! How long have you been running a blog for?
    you make running a blog glance easy. The entire glance of your site
    is magnificent, as neatly as the content! You can see similar here dobry sklep


Leave a Reply

Your email address will not be published. Required fields are marked *